Safety Data Sheet acc. to 1907/2006/EC, Article 31

Safety Data Sheet PDF download

Identification of substance

• Trade name: SN100C, SN100CL, SN100CLe, SN100Ce, SN100C4, SN100C3
• Application of the substance / the preparation: Solder alloys
• Manufacturer / Supplier:
  Balver Zinn Josef Jost GmbH & Co.KG
  Blintroper Weg 11, D-58802 Balve, Germany
  Phone: +49 2375 915 – 0, Fax: +49 2375 915 – 114
• E-mail address of the competent person responsible for the Safety Data Sheet: info@csb-online.de
  
• Informing department: Sales / Technics
  
• Emergency information: LB-Gift Berlin Phone: +49 (0) 30 / 19240

Hazards identification

• Hazard designation: void
• Information pertaining to particular dangers for man and environment: void
• Classification system: The product does not have to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version.

Composition/information on ingredients

• Chemical characterization
• Description: Mixture of the substances listed below with harmless products.

Dangerous components:
CAS: 7440-31-5 EINECS: 231-141-8	Tin		50 - 100%
CAS: 7440-50-8 EINECS: 231-159-6	Copper		< 5%
CAS: 7440-02-0 EINECS: 231-111-4 Index Number: 028-002-00-7	Nickel	Xn, Xi; R 40-43	< 0,1%

• Additional information: For the wording of the listed risk phrases refer to section 16.

First aid measures

• General information: Measures are only required if dusts, vapours or fumes are formed during use.
• After inhalation: Supply fresh air; consult doctor in case of symptoms.
  If dust or other particles are generated during processing, it is nessecary to provide adequate ventilation and/or respiration protection. If dust/particles have been respirated call physician.
• After skin contact: The product is not skin irritating. Wash with soap and water.
• After eye contact: Unlikely route of exposure
• After swallowing: Unlikely route of exposure

Fire fighting measures

• Suitable extinguishing agents: Special powder for metal fires. Do not use water.
• Special hazards caused by the material, its products of combustion or flue gases: Harmfull metal oxid smoke
• Protective equipment: Wear self-contained breathing apparatus.
• Additional information: Collect contaminated fire fighting water separately. It must not enter drains.

Accidental release measures

• Person-related safety precautions: Not required.
• Measures for environmental protection: No special measures required.
• Measures for cleaning/collecting:
  • Collect mechanically.
  • Send for recovery or disposal in suitable containers.
  • Dispose of the material collected according to regulations.

Handling and storage

Handling

• Information for safe handling:
  • Ensure good ventilation/exhaustion at the workplace.
  • If dust/smoke is developed, avoid breathing dust/smoke.
  • Make sure that all applicable workplace limits are observed.
• Information about protection against explosions and fires: No special measures required.

Storage

• Requirements to be met by storerooms and containers: Observe all local and national regulations for storage of water polluting products.
• Information about storage in one common storage facility: Not required
• Further information about storage conditions: None

Exposure controls and personal protection

• Additional information about design of technical systems: No further data; see item 7.
• Components with critical values that require monitoring at the workplace:
  • Observe all workplace limits for dust:
  • OEL total dust: 10 mg/m³
  • OEL respirable dust: 3 mg/m³

• 7440-50-8 Copper:
• WEL (Great Britain)
  Short-term value: 2** mg/m³
  Long-term value: 0.2* 1** mg/m³
  *fume **dusts and mists (as Cu)
• 7440-02-0 Nickel:
• WEL (Great Britain)
  Long-term value: 0.5 mg/m³
  as Ni

• Additional information: The lists that were valid during the compilation were used as basis.

Personal protective equipment:

• General protective and hygienic measures:
  • Keep away from foodstuffs, beverages and food.
  • Do not breathe vapours.
  • Wash hands during breaks and at the end of the work.
  • Use skin protection cream for preventive skin protection.
• Breathing equipment:
  • Breathing equipment necessary if dusts or fumes are formed.
  • If all workplace limits are observed and good ventilation is ensured, no special precautions nessecary.
• Protection of hands: Heat resistant gloves
  
• Material of gloves
  • Carry heat insulating gloves by rough soldering work.
  • The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
  • As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
• Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
• Eye protection: Safety glasses recommended during soldering works.
• Body protection: Wear heat-resistant protective clothing when handling hot/molten product.

Physical and chemical properties

• General Information:
  
  • Form: solid in various forms
  • Colour: according to product specification
  • Smell: odourless
• Change in condition:
  
  • Melting point/Melting range: For data of a specific product please refer to technical data sheet.
  • Boiling point/Boiling range: not determined
• Flash point: not applicable
• Self-inflammability: Product is not selfigniting.
• Danger of explosion: Product is not selfigniting.
• Density: For data of a specific product please refer to technical data sheet.
• Solubility in / Miscibility with Water insoluble
• Additional information:
  Further informations please refer to technical data sheet.

Stability and reactivity

• Thermal decomposition / conditions to be avoided:
  No decomposition if used according to specifications.
• Materials to be avoided: none
• Dangerous reactions: No dangerous reactions known.
• Dangerous products of decomposition:
  Toxic or harmful metal oxides

Toxicological information

Acute toxicity:

• Primary irritant effect:
• on the skin: No irritant effect
• on the eye: No irritant effect
• Sensitization: Contains a sensitising substance. May produce an allergic reaction.
• Additional toxicological information: When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us.

Ecological information:

Additional ecological information:

• According to recipe contains the following heavy metals and compounds according to EC guideline NO. 76/464 EC:
  • 50 - 100% Sn
  • < 5% Cu
  • > 0,1% Ni
• General notes: Water hazard class 1 (Self-assessment): slightly hazardous for water

Disposal considerations

Product:

• Recommendation: Disposal must be made according to official regulations. Contact manufacturer for recycling information.
• European waste catalogue: Waste disposal key numbers from EWC have to be assigned depending on origin and processing.

Uncleaned packagings:

• Recommendation: Disposal must be made according to official regulations. Contact manufacturer for recycling information.

Transport information

Land transport ADR/RID (cross-border):

• ADR/RID Class:-

Maritime transport IMDG/GGVSea:

• IMDG/GGVSea Class: -

Air transport ICAO-TI and IATA-DGR:

• ICAO/IATA Class: -

• Transport/Additional information: Not dangerous according to the above specifications.

Regulatory information

• Designation according to EC guidelines:
  The product is not subject to classification according to the calculation methods of the "General Classification Guideline for Preparations of the EC" as issued in the last version. Das Produkt ist nicht kennzeichnungspflichtig auf Grund des Berechnungsverfahrens der "Allgemeinen Einstufungsrichtlinie für Zubereitungen der EG" in der letztgültigen Fassung.

National regulations

• Decree to be applied in case of technical fault: -
• Water hazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water

Other information:

These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.

• Reasons for changes: The Material Safety Data Sheet has been revised. Changes in the respective chapters are characterized in the left side edge by *.
• Relevant R-phrases:
  
  • The(se) R-phrase(s) are those of the ingredient(s) and do(es) NOT represent the classification of the preparation.
  • 40 Limited evidence of a carcinogenic effect.
  • 43 May cause sensitisation by skin contact.
• Department issuing MSDS:
  C.S.B. GmbH
  Oberstraße 10
  D-47829 Krefeld
  Phone: 02151 / 652086-0
  Fax: 02151 / 652086-9
• * Data compared to the previous version altered.